Cleaning the appliance

To clean the Main body of the appliance, use a dry cloth. Ensure that the narrow opening on the front of the Dyson Supersonic™ is free of obstructions.

Airflow selection

The level of sound from your appliance will vary depending on the airflow selected. To decrease the airflow, press the 'Airflow control' button until you have 1 white LED light.

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Cleaning your filter - Step-by-step

Cleaning your filter – Regular clean

IMPORTANT: always switch OFF and unplug before carrying out any maintenance.

Use a dry, lint-free cloth to wipe clean the outer filter cage (be sure to clean the entire filter cage, wiping up and down and side to side).

Rotate the filter cage anti-clockwise and gently pull away from the machine.

Use a dry, lint-free cloth to wipe clean the filter mesh (be sure to clean the entire filter mesh, wiping up and down and side to side).

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Cleaning your filter - Deep clean

Use a damp lint-free cloth to wipe the inner mesh (IMPORTANT: do not use other cleaning products/solvents or liquids).

Leave the machine to sit for 5 minutes.

Brush the filter mesh firmly with a new or lightly used clean, dry toothbrush for two minutes (be sure to brush the entire filter mesh, brushing up and down and side to side).

Wipe the filter mesh using a dry, lint-free cloth.

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Airflow control

The direction of airflow from the Dyson Supersonic hair dryer is from the opposite side to the controls.

To increase the airflow, press the 'Airflow control' button on the back of the appliance until you have three white LED lights. The available settings are:

One white light - Gentle (styling)

Two white lights - Medium (regular drying)

Three white lights - Fast (fast drying)

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Temperature

The Dyson Supersonic™ hair dryer is intelligent. It has a clever microprocessor which regulates temperature to help prevent extreme heat damage to protect natural shine. The maximum operating temperature in normal working conditions is up to 105°C/221°F.

To increase the temperature, press the 'Temperature control' button on the back of the appliance until you have three red LED lights. The available settings are:

One red light - low gentle drying

Two red lights - Medium 80°C/176°F (regular drying)

Three red lights - High 100°C/212°F (Fast drying and styling)

Check voltage

Please check that the machine is being used in a country with an electricity supply within the same range as that of where it was purchased:

220-240V

Australia

China

Egypt

Europe

Greenland

Hong Kong

India

Indonesia

Ireland

Malaysia

New Zealand

Peru

Philippines

Russia

Singapore

South Africa

South Korea

Thailand

United Arab Emirates

United Kingdom

100-127V

Canada

Japan

Mexico

Taiwan

United States of America

For example, if you take a machine purchased in the United Kingdom to Europe, it will work. If you take a machine purchased in the United States to Europe, it will not switch on.

Plug the machine back in using a different plug socket.

Please retest the machine once in a country with the same electricity supply range to where it was purchased.

Try a different plug socket

Plug the machine back in using a different plug socket.

Leave the machine at least 5 minutes since it was last working to cool down.

The ALCI may have tripped whilst in use. Please perform the following checks.

Plug the Dyson Supersonic™ into the wall and press the yellow ‘test’ button.

The red ‘reset’ button will now click out of place. To reset the ALCI, unplug the Dyson Supersonic™ and press the ‘reset button’.

Plug the machine back in and retest.

Lights

Check the lights on the machine.

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Check the machine

Check that the household electrics are on.

Check the plug and power cord for signs of damage.

Leave the machine at least 5 minutes since it was last working to cool down.

Try the machine in a different plug socket.

Clean the filter

This indicates that the appliance has overheated. This usually happens because the filter needs cleaning.

Unplug your appliance from the mains supply socket and leave to cool for a minimum of 1 hour.

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Check the machine

Please check that the socket is not being shared with another electrical device as this may effect the voltage.

Please note we do not recommend using your product via an extension cable.

Please connect the power cable to the mains supply socket.

Cleaning your filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Is there anything else we can help you with?"

Cleaning your filter - Step-by-step

Cleaning your filter – Regular clean

IMPORTANT: always switch OFF and unplug before carrying out any maintenance.

Use a dry, lint-free cloth to wipe clean the outer filter cage (be sure to clean the entire filter cage, wiping up and down and side to side).

Rotate the filter cage anti-clockwise and gently pull away from the machine.

Use a dry, lint-free cloth to wipe clean the filter mesh (be sure to clean the entire filter mesh, wiping up and down and side to side).

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Cleaning your filter - Deep clean

Use a damp lint-free cloth to wipe the inner mesh (IMPORTANT: do not use other cleaning products/solvents or liquids).

Leave the machine to sit for 5 minutes.

Brush the filter mesh firmly with a new or lightly used clean, dry toothbrush for two minutes (be sure to brush the entire filter mesh, brushing up and down and side to side).

Wipe the filter mesh using a dry, lint-free cloth.

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Cleaning your filter - Step-by-step

Cleaning your filter – Regular clean

IMPORTANT: always switch OFF and unplug before carrying out any maintenance.

Wipe the filter mesh using a dry, lint-free cloth.

Use a dry, lint-free cloth to wipe clean the outer filter cage (be sure to clean the entire filter cage, wiping up and down and side to side).

Rotate the filter cage anti-clockwise and gently pull away from the machine.

Use a dry, lint-free cloth to wipe clean the filter mesh (be sure to clean the entire filter mesh, wiping up and down and side to side).

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Cleaning your filter - Deep clean

Use a damp lint-free cloth to wipe the inner mesh (IMPORTANT: do not use other cleaning products/solvents or liquids).

Leave the machine to sit for 5 minutes.

Brush the filter mesh firmly with a new or lightly used clean, dry toothbrush for two minutes (be sure to brush the entire filter mesh, brushing up and down and side to side).

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Check the lights

For intermittent power, please check the lights.

There can be a very slight delay between pressing the power switch and airflow beginning; please allow for this.

This indicates that the appliance has overheated. This usually happens because the filter needs cleaning. Unplug your appliance from the mains supply socket and leave to cool for a minimum of 1 hour.

This indicates that the appliance has overheated. This usually happens because the filter needs washing. Unplug your appliance from the mains supply socket and leave to cool for a minimum of 1 hour.

ON/OFF switch

The machine is switched off using the sliding ON/OFF switch.

Finding the machine serial number

The serial number can be found in the following locations:

On the front of the instruction manual.

On the box of the machine.

On the power cord near the plug.

Within the first few uses it is normal to expect a smell from any brand new appliance with a heater element (e.g. toaster/oven/kettle) The smell will fade with time and usage.

If the smell still occurs after a few uses, please select the appropriate smell.

Dusty smell

If your appliance has a dusty smell, ensure that the air exit is free of obstructions and clean the filter.

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Using the accessories

The hair dryer accessories are magnetic and can be easily attached to the front of the appliance. They can be rotated 360 degrees so you can position them precisely where you need them.

Check all accessories

Please try to attach all accessories to the hair dryer.

Smoothing nozzle

Styling concentrator

Diffuser

Gentle air attachment

Wide-tooth comb attachment

Display stand

Attach each accessory to the second magnet on the display stand whilst ensuring that the accessory is aligned to the stand correctly.

The Styling concentrator and Smoothing nozzle attach to the stand at the top.

The Diffuser attaches to the stand at the bottom.

The Gentle air attachment can be stored at the top of the stand in replacement of either the Styling concentrator or Smoothing nozzle.

The hair dryer attaches to the stand at the top.

The Wide-tooth comb and Flyaway attachment cannot be stored on the display stand.

Please open the PDF for the user manual.

Please click on the link to download the user manual.

Using your machine abroad

Your appliance may be used in a country with an electricity supply within the same range as that of where your appliance was purchased.

220-240V

• Australia
• China
• Egypt
• Europe
• Greenland
• Hong Kong
• India
• Indonesia
• Ireland
• Malaysia
• New Zealand
• Peru
• Philippines
• Russia
• Singapore
• South Africa
• South Korea
• Thailand
• United Arab Emirates
• United Kingdom

100-127V

• Canada
• Japan
• Mexico
• Taiwan
• United States of America

For example, if you take a machine purchased in the United Kingdom to Europe, it will work. If you take a machine purchased in the United States to Europe, it will not switch on.

How to use the accessories

Magnetic accessories can be quickly and easily attached to the front of the machine. They can be rotated 360 degrees so you can position them precisely where you need them.

Smoothing nozzle

Dries hair gently using smooth air.

Styling concentrator

Fast, precise airflow for controlled styling, one section at a time.

Diffuser

Evenly disperses airflow to dry curls gently and help reduce frizz. Recommended for use on low temperature and flow settings.

Gentle air attachment

Designed to be kinder to fine hair and sensitive scalps. Add volume at the roots, or create texture through the lengths.

Wide-tooth comb attachment

Engineered for curly and textured hair. Lengthen hair, or tease out curls just a little bit.

Pacemakers

We recommend to keep the Dyson Supersonic™ hair dryer away from pacemakers, defibrillators, credit cards and electronic storage media. The product is compliant (CE marked) and if there are any concerns then consult with a doctor with regards to specific requirements of your pacemaker.

The magnets have been measured to product approximately 300 gauss.

Finding the machine serial number

The serial number can be found in the following locations:

On the front of the instruction manual.

On the box of the machine.

On the power cord near the plug.

Styling

Here at Dyson we are the experts in the technology and how it works, but for information on the latest trends and how to create specific styles, we would encourage you to take a look online.

You can follow us on social media, we've worked with some top hair and beauty professionals and vloggers to create some styling tips. You can find our social media links below.

• Youtube
• Instagram
• Facebook
• Twitter

Clean the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Is there anything else we can help you with?"

Cleaning your filter - Step-by-step

Cleaning your filter – Regular clean

IMPORTANT: always switch OFF and unplug before carrying out any maintenance.

Use a dry, lint-free cloth to wipe clean the outer filter cage (be sure to clean the entire filter cage, wiping up and down and side to side).

Rotate the filter cage anti-clockwise and gently pull away from the machine.

Use a dry, lint-free cloth to wipe clean the filter mesh (be sure to clean the entire filter mesh, wiping up and down and side to side).

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

Cleaning your filter - Deep clean

Use a damp lint-free cloth to wipe the inner mesh (IMPORTANT: do not use other cleaning products/solvents or liquids).

Leave the machine to sit for 5 minutes.

Brush the filter mesh firmly with a new or lightly used clean, dry toothbrush for two minutes (be sure to brush the entire filter mesh, brushing up and down and side to side).

Wipe the filter mesh using a dry, lint-free cloth.

Rotate the filter cage back into position, ensuring the correct alignment.

WARNING: Rotate clockwise to lock before use.

Run the machine for up to one minute. The product should function as expected.

How to replace the filter cover

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Is there anything else we can help you with?"