Please follow the steps in the video.

How to replace the filter

Ensure the purifier is unplugged.

Press both buttons to lift of the loop amplifier.

Remove the old filter and dispose of your old filter in your household waste bin.

Lower the new filter into the housing and the complete unit onto the Main body.

Lower the loop amplifier onto the base until it clicks and locks.

When you have reassembled your purifier, press and hold the 'Standby ON/OFF' button on the remote for 6 seconds.

A clockwise rotating pattern will be shown on the LED display.

Once the loading pattern is complete, the purifier will return to its normal usage.

Your Dyson machine is programmed to remind you to replace the filter unit after 12 months based on 12 hours usage a day. Please note your indicator will activate sooner with more use. The indicator is only a guide and you may need to replace the filter unit more regularly.

Check base

Check around the base of the machine for any debris or obstructions.

Paper in the clear bin

This will indicate that the machine is working correctly.

Like our other cordless vacuums, this machine is engineered for quick clean-ups on hard floors and carpeting, as well as for furniture, stairs and inside the car.

Refit machine

Remove loop amplifier.

Refit it ensuring that there is no uneven gap between the loop and the Main body.

Ensure correct button on remote is being pressed

ON/OFF.

Airflow

Oscillation.

Sleep timer

Point the remote directly at the front of the machine while pressing the button.

Check remote control buttons

ON/OFF.

Airflow

Oscillation

Sleep timer

Point the remote directly at the front of the machine while pressing the button.

Hold standby button

Press and hold the Standby button on the appliance to adjust the airflow.

Airflow will increase to a maximum before decreasing.

Change battery

Unscrew the remote control's battery compartment.

Loosen the base and pull it away from the remote. Replace the battery with type CR 2032.

Newspaper test

Turn the airflow control to maximum.

Hold a sheet of newspaper approximately 4 meters (13') away from the product.

The paper should lift beyond 45 degrees.

Check and clean machine

The following areas should be checked and cleaned to maintain the machine's performance.

Loop amplifier

Clean with a dry cloth or soft brush.

Main body

Clean the shroud with a dry cloth.

Use a soft brush to clear any blockages from the holes.

Check the electrics

Check that the household electrics are on.

Check the plug and power cord for signs of damage.

Try the machine in a different plug socket.

Interruption in the electricity

Unplug the machine and leave it for 10 seconds.

Plug in and test the machine.

Check and clean machine

Loop amplifier - clean with a dry cloth or soft brush.

Main body - clean with a dry cloth or soft brush.

Inlet grille - clean with a dry cloth or soft brush.

Filter

Your filter may need replacing. Check for excessive build up of dust within the inlet.

Check base

Ensure all the feet are attached to the base of the machine.

Place the purifier on a flat, non-slip surface.

Check remote

ON/OFF.

Airflow

Oscillation.

Sleep timer

Point the remote directly at the front of the machine while pressing the button.

Check correct button is being pressed

ON/OFF.

Airflow

Oscillation.

Sleep timer

Point the remote directly at the front of the machine while pressing the button.

Check other remote functions

ON/OFF.

Airflow

Oscillation.

Sleep timer

Use controls on machine

Press and hold the Standby button on the appliance to adjust the airflow.

Airflow will increase to a maximum before decreasing.

Check the electrics

Check that the household electrics are on.

Change the fuse in the machine's plug.

Check the plug and power cord for signs of damage.

Try the machine in a different plug socket.

Ensure correct button on remote is being pressed

ON/OFF.

Airflow

Oscillation.

Sleep timer

Point the remote directly at the front of the machine while pressing the button.

Please follow the steps in the video.

Replace the filter

Ensure the purifier is unplugged.

Press both buttons to lift of the loop amplifier.

Remove the old filter and dispose of your old filter in your household waste bin.

Lower the new filter into the housing and the complete unit onto the Main body.

Lower the loop amplifier onto the base until it clicks and locks.

When you have reassembled your purifier, press and hold the 'Standby ON/OFF' button on the remote for 6 seconds.

A clockwise rotating pattern will be shown on the LED display.

Once the loading pattern is complete, the purifier will return to its normal usage.

Your Dyson machine is programmed to remind you to replace the filter unit after 12 months based on 12 hours usage a day. Please note your indicator will activate sooner with more use. The indicator is only a guide and you may need to replace the filter unit more regularly.

Please open the PDF for the user guide.

Assembling your machine

Lower the loop amplifier onto the base until it clicks and locks.

The remote control can be magnetically attached to the top of the loop.

Power

To operate, point the remote control toward the front of the base and press the standby ON/OFF button. Alternatively press the standby ON/OFF button on the Main body.

Attach the remote

Attach the remote control to the top of the machine with the buttons facing down.

Timer

To set the sleep timer, select the desired time.

When the time reaches zero, the appliance will go into standby mode.

To cancel, reduce the time until two dashes appear.

Oscillation

Toggle oscillation on or off with the remote.

Airflow

Airflow can be set by the airflow buttons on the remote.

Airflow can also be set on the machine. Press and hold the power button to roll through settings 1 to 10.

Using the remote control

To operate, point the remote control toward the front of the base.

ON/OFF.

Airflow

Oscillation.

Sleep timer

To store, attach the remote control to the top of the appliance with the buttons facing down.

Locating the serial number

The serial number can be found on the base of the machine.

Using machine controls

Press the Standby button on the appliance to turn ON/OFF.

Press and hold the Standby button on the appliance to adjust the airflow.

Airflow will increase to a maximum before decreasing.

NB: The oscillation and timer functions cannot be operated without the remote control.

Check and clean machine

The following areas should be checked and cleaned to maintain the machine's performance.

Loop amplifier - clean with a dry cloth or soft brush.

Main body - clean with a dry cloth or soft brush.

Shroud - clean with a dry cloth or soft brush.

Please follow the steps in the video.

Changing batteries

Unscrew the remote control's battery compartment.

Loosen the base and pull it away from the remote. Replace the battery with type CR 2032.