Skip navigation Accessibility Statement
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Let's get your machine working

Dyson V7 Motorhead Pro Exclusive vacuum
See all steps

Please select the appropriate option

Washing the filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Is there anything else we can help you with?"

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

Washing the filter

To remove the filter, lift it out of the top of the machine.

With cold water only, run water over the outside of the filter until the water runs clear.

Turn the filter upside down and shake to remove any excess debris.

Squeeze and twist the filter with both hands to make sure the excess water is removed.

Drying the filter

Lay the filter on its side to dry. Leave to dry completely for a minimum of 24 hours.

Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave or near a naked flame.

Replacing the filter

To refit the filter, place the dry filter back into the top of the machine. Ensure it is fitted properly.

Is there anything else we can help with?

Please select the appropriate option

Machine is pulsating

The machine is designed to pulsate. This is an audible feature that indicates a problem, as well as preventing damage to the motor. This is usually caused by a restriction in airflow or a blockage within the machine.

If the machine does not have any power, please check the status light and select which light is showing.

Please select the appropriate option

Unplug machine from charger

Test the machine

Press and hold the trigger for 10 seconds.

You might need to arrange a visit from a Dyson expert.

It looks like the Main body and screws isn't working. A new one will need to be replaced by a Dyson Expert.

Please contact us. Our helpline will be able to arrange an appointment for you.

Main body and screws

Part no. 968677-01

Replacement main body and screws for your Dyson vacuum cleaner.

$129.99

Main body and screws

Part no. 968677-01

Replacement main body and screws for your Dyson vacuum cleaner.

$129.99

How to install this part

Inspect the power cable

With the charger unplugged check the cable for any damage.

If no damage is found, plug the charger back in and in to the machine directly.

Wiggle the cable to see if you can get the machine to charge. If by moving the cable charges the machine, please select "Charger is faulty"

How to remove the charger from the dock

Remove the machine and its accessories from the dock and unplug the charger from the mains.

Using a screwdriver remove the two screws on the docking station.

With the dock removed, unfeed the cable through the channel on the back of the dock.

Try the machine in a different plug socket.

Charge the machine

Charge the machine without the dock for 3.5 hours.

Has this resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

You might need a replacement part.

You can solve this by ordering a new Charger below or you can contact our Customer Support Team at 1-866-314-8881.

Charger

Part no. 967813-02

<p>Charges your vacuum with or without the Wall Dok&trade;.</p>

$29.99

Charger

Part no. 967813-02

<p>Charges your vacuum with or without the Wall Dok&trade;.</p>

$29.99

$29.99

Solid blue light

Plug the machine in and leave it to charge for 3.5 hours.

Has this resolved the problem?

We need a little more information to help us solve your issue.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen. Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Charge the machine

This indicates that the machine is outside of its normal operating temperature (5oc - 35oc).

Please place the machine in an area that stays within this temperature range and leave it to charge there for 3.5 hours.

Please select the appropriate option

We need a little more information to help us solve your issue.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen. Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

Charge the machine

Place the machine on charge.

Charge the machine

A solid blue light will show when the machine is being charged and will go out when charging is complete.

Please charge the battery for 3.5 hours before contacting customer services.

Has this resolved the problem?

Amber light

An amber light will show or flash if the machine is operating outside of its normal working temperature and the machine may stop working.

An amber light may also show when charging, this light will go out once the machine is fully charged.

Before using the machine, ensure it is back to its operating temperature 3°C/37°F and 40°C/104°F.

Troubleshooting image

Please select the appropriate option

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

Reset the machine

Press and hold the trigger for 3 seconds.

Repeat this 5 times.

Amber light goes out

Please charge the machine for 3.5 hours before using it.

Has this resolved the problem?

Test the machine

Pull the trigger and count the number of red flashes.

Troubleshooting image

How many times did the light flash?

Has a Main body been received recently to resolve the issue?

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Check the floor tool

If the machine is not performing as well as it used to this is typically caused by a partial or full blockage within the openings of the machine.

Remove the Cleaner head from the Wand, and remove the Wand from the machine.

Check both ends of the Wand for blockages and remove as necessary.

Refit the Cleaner head onto the Wand and connect the Wand back onto the machine.

Check the floor tool

On the side of the Direct drive cleaner head, locate the end cap. Using a coin, turn the end cap anticlockwise a quarter of the way to remove it.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Troubleshooting image

Remove the Brush bar from the Cleaner head and clear away any hair or fibres.

Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

Troubleshooting image

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.

Place the Cleaner head onto the bin and test the machine.

Troubleshooting image

Has this resolved the problem?

Remove the bin

Pull the cyclone release catch upwards until the bin base opens.

Troubleshooting image

Press the red catch once the bin base is open to release the bin.

Check the bin inlet

Check the bin inlet ensuring that it moves freely. Fluff or fibres jamming the hinge can cause the flap to close resulting in low suction and a pulsating noise.

Gently tap the side of the cyclone over a bin. This will remove any fine dust clogged up in the cyclone.

Using the Combination tool, brush away any dust around the shroud of the cyclone.

Once cleared of any dust, press and hold the trigger for 10 seconds.

Reassemble and test the machine.

Troubleshooting image

Has this resolved the problem?

Remove the Wand

Remove the Cleaner head from the Wand, and remove the Wand from the machine.

Check both ends of the Wand for blockages and remove as necessary.

Refit the Cleaner head onto the Wand and connect the Wand back onto the machine.

Has this resolved the problem?

Filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

Washing the filter

To remove the filter, lift it out of the top of the machine.

Troubleshooting image

With cold water only, run water over the outside of the filter until the water runs clear.

Turn the filter upside down and shake to remove any excess debris.

Squeeze and twist the filter with both hands to make sure the excess water is removed.

Troubleshooting image

Lay the filter on its side to dry. Leave to dry completely for a minimum of 24 hours.

Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave or near a naked flame.

Troubleshooting image

To refit the filter, place the dry filter back into the top of the machine. Ensure it is fitted properly.

Troubleshooting image

Has this resolved the problem?

Clear the floor tool

On the side of the Mini motorised head, locate the end cap. Using a coin, turn the end cap anticlockwise a quarter of the way to remove it.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Troubleshooting image

Remove the Brush bar from the Cleaner head and clear away any hair or fibres.

Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

Troubleshooting image

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.

Place the Cleaner head onto the bin and test the machine.

Troubleshooting image

Has this resolved the problem?

Open the bin

Pull the cyclone release catch upwards until the bin base opens.

Troubleshooting image

Remove the bin

Press the red catch underneath the bin once the bin base is open to release it from the machine.

Troubleshooting image

Check the bin inlet

Check the bin inlet ensuring that it moves freely. Fluff or fibres jamming the hinge can cause the flap to close resulting in low suction and a pulsating noise.

Gently tap the side of the cyclone over a bin. This will remove any fine dust clogged up in the cyclone.

Using the Combination tool, brush away any dust around the shroud of the cyclone.

Once cleared of any dust, press and hold the trigger for 10 seconds.

Has this resolved the problem?

Remove the filter

Pull the filter out of the top of the cyclone.

Troubleshooting image

Press and hold the trigger for 10 seconds.

Troubleshooting image

Does the noise still occur?

If your machine has a post-filter, please remove it from the machine.

If your machine doesn't have a post-filter please select 'Yes'.

Remove the post-filter

To unlock the post-filter, rotate it anti-clockwise until the two solid black dots line up.

Troubleshooting image

Does the noise still occur?

Washing the filters

To remove the pre-filter, lift it out of the top of the machine.

To unlock the post-filter, rotate it anti-clockwise until the two solid black dots line up.

With cold water only, run water over the outside of the filters until the water runs clear.

Turn the filter upside down and shake to remove any excess debris.

Squeeze and twist the pre-filter with both hands to make sure the excess water is removed, then tap and shake the post-filter to expel all debris.

Leave the filter to dry with the open end facing up for as long as possible.

Ensure the filter is completely touch dry prior to refitting.

WARNING: Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave, or near a naked flame.

To refit the filter, place the dry filter back into the top of the machine. Ensure it is fitted properly.

Rotate the post-filter clockwise until it locks in place and the solid black dot lines up with the empty circle.

Has this resolved the problem?

WARNING: Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave, or near a naked flame.

In most cases this would suggest that the filter is blocked

Please confirm the following steps to wash the filter below have been carried out and the machine has been retested.

Thoroughly wash the filter

Tap the filter against a hard surface.

See if there is any debris in the top of the filter.

Soak and massage the filter to dislodge any debris.

Run the filter under cold water.

Soak the filter again and confirm the water is clear.

Leave to dry for at least 24 hours.

Only place the filter in the machine when it’s completely dry.

Some variants may have a washable post-filter.

If it does, run the water into the open side of the post-filter, then tap and shake the filter to expel all debris.

Repeat the process until the water runs clear.

Has this resolved the problem?

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Filter

This indicates the filter needs washing. Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?".

Washing the filter

To remove the filter, lift it out of the top of the machine.

Troubleshooting image

With cold water only, run water over the outside of the filter until the water runs clear.

Turn the filter upside down and shake to remove any excess debris.

Squeeze and twist the filter with both hands to make sure the excess water is removed.

Troubleshooting image

Lay the filter on its side to dry. Leave to dry completely for a minimum of 24 hours.

Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave or near a naked flame.

Troubleshooting image

To refit the filter, place the dry filter back into the top of the machine. Ensure it is fitted properly.

Troubleshooting image

Has this resolved the problem?

Check the floor tool

Under the Cleaner head by the Soft roller, locate the fastener. Using a coin, turn the fastener anticlockwise a quarter of the way to remove the end cap.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Troubleshooting image

Remove the Brush bar from the Cleaner head and clear away any hair or fibres.

Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

Troubleshooting image

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.

Place the Cleaner head onto the bin and test the machine.

Has this resolved the problem?

The run time on Powerful suction mode is 20 minutes with the Motorised head and the Mini motorised head.

The run time on Powerful suction mode is 30 minutes with the combination tool and crevice tool.

MAX mode - 6 minutes with all tools.

Has this resolved the problem?

Remove the tools

Remove all tools and accessories from the machine.

Troubleshooting image

Press and hold the trigger for 10 seconds.

Does the noise still occur?

Open the bin

Pull the cyclone release catch upwards until the bin base opens.

Remove the bin

Press the red catch underneath the bin once the bin base is open to release it from the machine.

Check the bin inlet

Check the bin inlet ensuring that it moves freely. Fluff or fibres jamming the hinge can cause the flap to close resulting in low suction and a pulsating noise.

Press and hold the trigger for 10 seconds.

Does the noise still occur?

You might need a replacement part.

You can solve this by ordering a new Bin below or you can contact our Customer Support Team at 1-866-314-8881.

Bin

Part no. 967699-01

Replacement bin for your Dyson vacuum cleaner.

$22.99

Bin

Part no. 967699-01

Replacement bin for your Dyson vacuum cleaner.

$22.99

$22.99

How to install this part

You might need to arrange a visit from a Dyson expert.

It looks like the Main body and screws isn't working. A new one will need to be replaced by a Dyson Expert.

Please contact us. Our helpline will be able to arrange an appointment for you.

Main body and screws

Part no. 968677-01

Replacement main body and screws for your Dyson vacuum cleaner.

$129.99

Main body and screws

Part no. 968677-01

Replacement main body and screws for your Dyson vacuum cleaner.

$129.99

How to install this part

Clear the floor tool

On the side of the Direct drive cleaner head, locate the end cap. Using a coin, turn the end cap anticlockwise a quarter of the way to remove it.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Troubleshooting image

Remove the Brush bar from the Cleaner head and clear away any hair or fibres.

Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

Troubleshooting image

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.

Place the Cleaner head onto the bin and test the machine.

Troubleshooting image

Has this resolved the problem?

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Clear the floor tool

On the side of the Cleaner head, locate the end cap. Using a coin, turn the end cap anticlockwise a quarter of the way to remove it.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Troubleshooting image

Remove the Brush bar from the Cleaner head and clear away any hair or fibres.

Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

Troubleshooting image

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.

Place the Cleaner head onto the bin and test the machine.

Has this resolved the problem?

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Check the floor tool

Under the Cleaner head by the Soft roller, locate the fastener. Using a coin, turn the fastener anticlockwise a quarter of the way to remove the end cap.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Troubleshooting image

Remove the Brush bar from the Cleaner head and clear away any hair or fibres.

Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

Troubleshooting image

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.

Place the Cleaner head onto the bin and test the machine.

Troubleshooting image

Has this resolved the problem?

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Check the machine

To ensure the correct checks are carried out, we will need to determine if this is a pick up issue or if the machine is pulsating.

The machine is designed to pulsate. This is an audible feature that indicates a problem, as well as preventing damage to the motor. This is usually caused by a restriction in airflow or a blockage within the machine.

Please ensure the bin is empty before continuing with any checks.

Remove all tools and accessories from the machine e.g. Wand, Cleaner head, Crevice tool etc.

Troubleshooting image

Check both ends of the Wand for blockages and remove as necessary.

Troubleshooting image

Press and hold the trigger for 10 seconds.

Troubleshooting image

Does the issue occur without the tools?

Remove the filter

Pull the filter out of the top of the cyclone.

Troubleshooting image

Press and hold the trigger for 10 seconds.

Troubleshooting image

Has this resolved the problem?

Open the bin

Pull the cyclone release catch upwards until the bin base opens.

Troubleshooting image

Remove the bin

Press the red catch once the bin base is open to release the bin.

Check the bin inlet

Check the bin inlet ensuring that it moves freely. Fluff or fibres jamming the hinge can cause the flap to close resulting in low suction and a pulsating noise.

Gently tap the side of the cyclone over a bin. This will remove any fine dust clogged up in the cyclone.

Using the Combination tool, brush away any dust around the shroud of the cyclone.

Once cleared of any dust, press and hold the trigger for 10 seconds.

Has this resolved the problem?

Filter

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Has this resolved the problem?"

The serial number can be located in three places.

Behind the clear bin

Find the serial number behind the clear bin as shown on the image.

Troubleshooting image

On the underside of the battery pack

The serial number is printed on the back of the battery pack at the base of the handle.

Troubleshooting image

Inside the handle

Remove the battery to reveal the serial number inside the machine’s handle.

Troubleshooting image

Please select the appropriate option

How to buy and fit parts for your machine

Get original replacement parts direct from Dyson and learn how to fit them with your machine.

Main body

Choose the part you'd like to replace.

  • Docking station
  • Main body
  • Post-filter
  • Battery
  • Charger
Troubleshooting image

Cyclone and bin

Choose the part you'd like to replace.

  • Combination tool
  • Crevice tool
  • Quick-release mini Motohead
  • Mini motorhead brush bar
  • Mini motorised tool end cap
  • Pre-filter
  • Cyclone
  • Bin
  • Wand
Troubleshooting image

Direct Drive cleaner head

Choose the part you'd like to replace.

  • Axle & roller
  • V-ball wheel
  • Direct Drive cleaner head
Troubleshooting image

Soft roller cleaner head

Choose the part you'd like to replace.

  • Soft roller end cap
  • Soft roller brush bar
  • Soft roller cleaner head
Troubleshooting image

Accessories

Choose the part you'd like to replace.

  • Crevice tool
  • Quick release adaptor tool
  • Quick-release extension hose
  • Quick-release stubborn dirt brush
  • Quick-release mini soft dusting brush
  • Quick-release Mattress tool
  • Quick-release up-top adaptor
  • In-car charger
  • Tool bag
  • Quick-release handheld tool kit
Troubleshooting image

Accessories

Choose the part you'd like to replace.

  • Crevice tool
  • Quick release adaptor tool
  • Quick-release extension hose
  • Quick-release stubborn dirt brush
  • Quick-release mini soft dusting brush
  • Quick-release Mattress tool
  • Quick-release up-top adaptor
  • In-car charger
  • Tool bag
  • Quick-release handheld tool kit
Troubleshooting image

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

You might need a replacement part.

You can solve this by ordering a new In-car charger below or you can contact our Customer Support Team at 1-866-314-8881.

In-car charger

Part no. 967837-02

Plugs into a standard 12V lighter socket for charging in your car, caravan or boat.

$39.99

In-car charger

Part no. 967837-02

Plugs into a standard 12V lighter socket for charging in your car, caravan or boat.

$39.99

Currently out of stock.

$39.99

Keep me updated

Plugs into a standard 12V lighter socket for charging in your car, caravan or boat. For use with selected Dyson cordless vacuums.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

If you would like to purchase genuine Dyson tools and accessories for your machine, click here.

Has this resolved the problem?

All the tools provided with the machine will fit the wand and the bin inlet.

Attach the tools to the end of the wand, ensuring the connections line up.

Dispose of any old parts in accordance with local codes and regulations.

Troubleshooting image

Were you able to fit your part?

Cyclone & bin

Choose the part you'd like to replace.

  • Combination tool
  • Crevice tool
  • Quick-release mini Motohead
  • Mini motorhead brush bar
  • Mini motorised tool end cap
  • Pre-filter
  • Cyclone
  • Bin
  • Wand
Troubleshooting image

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Read the step-by-step guide on replacing the bin".

Removing the bin

Remove the clear bin by holding the machine by the handle and pulling the red lever back, and then lift upwards to release the cyclone.

Troubleshooting image

Press the red Bin release catch located to the rear of the clear Bin.

Troubleshooting image

Remove the clear Bin fully.

Replace the bin

To replace the bin, push it up and in to the Main body of the machine until it clicks in to place.

Troubleshooting image

Close the bin base of the machine ensuring it clicks in to place.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Always ensure that your machine is unplugged from the charger prior to carrying out any maintenance.

Troubleshooting image

Removing the cyclone

To remove the cyclone, hold the appliance by the handle, pull the red lever towards you and lift upwards until the bin opens, then push in the red button located behind the cyclone and lift the cyclone out.

Troubleshooting image

Replace the cyclone

To attach the replacement cyclone, slide the cyclone into the grooves of the main body and push downwards until it is in its normal position.

Troubleshooting image

Manually close the base of the bin – the base will click when it is securely in place.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

All the tools provided with the machine will fit the wand and the bin inlet.

Attach the tools to the end of the wand, ensuring the connections line up.

The mini motorhead can provide the functionality of the main cleaner head but in hard to reach areas, such as your sofa.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Tools required

A coin is required to replace this part.

Troubleshooting image

Always switch 'OFF' and unplug before carrying out any maintenance.

Troubleshooting image

Remove the brush bar

Using a coin, undo the end cap by rotating anti-clockwise, and remove the brush bar.

Troubleshooting image

Replace the brush bar

Replace the replacement brush bar back into the motorhead, and using a coin lock the end cap by rotating clockwise.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Tools required

A coin is required to replace this part.

Troubleshooting image

Always unplug before carrying out any maintenance.

Troubleshooting image

Remove the wand from the cleaner head.

Troubleshooting image

Remove end cap

Using a coin, turn the end cap fastener to the unlock position.

Troubleshooting image

Dispose of any parts in accordance with local codes and regulations.

Troubleshooting image

Replace the end cap

Fit the new end cap. Using a coin, turn the end cap fastener to the lock position.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

You might need a replacement part.

You can solve this by ordering a new Pre-filter (Blue) below or you can contact our Customer Support Team at 1-866-314-8881.

Pre-filter (Blue)

Part no. 965661-01

<p>Replacement Pre-filter (Blue) for your Dyson vacuum cleaner.</p>

$11.99

Pre-filter (Blue)

Part no. 965661-01

<p>Replacement Pre-filter (Blue) for your Dyson vacuum cleaner.</p>

$11.99

$11.99

Always switch 'OFF' and unplug before carrying out any maintenance.

Troubleshooting image

Remove the pre-filter

Lift the pre-filter out of the Cyclone assembly.

Troubleshooting image

Replace the filter

Refit the replacement filter into the Cyclone assembly.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

All the tools provided with the machine will fit the wand and the bin inlet.

Attach the tools to the end of the wand, ensuring the connections line up.

Dispose of any old parts in accordance with local codes and regulations.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

All the tools provided with the machine will fit the wand and the bin inlet.

Attach the tools to the end of the wand, ensuring the connections line up.

Dispose of any old parts in accordance with local codes and regulations.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

You might need a replacement part.

You can solve this by ordering a new Wand below or you can contact our Customer Support Team at 1-866-314-8881.

Wand

Part no. 967477-03

Replacement wand for your Dyson vacuum cleaner.

$29.99

Wand

Part no. 967477-03

Replacement wand for your Dyson vacuum cleaner.

$29.99

$29.99

All the tools provided with the machine fit directly to the Wand or the bin inlet.

Click the wand to the end of the bin assembly, ensuring the connections line up.

Dispose of any old parts in accordance with local codes and regulations.

Troubleshooting image

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

Apologies. We can’t help you online.

Please contact our Customer Support Team by calling 1-866-314-8881 or by clicking the Live Chat button in the bottom right corner of your screen.

Dyson Supersonicᵀᴹ hair dryer Professional edition owners should call 1-866-861-2565.

Tools required

A Phillips head screwdriver is required to replace this part.

Troubleshooting image

Please follow the steps in the video.

Find the text version of the step-by-step guide instead, under "Read the step-by-step guide on replacing the battery".

Tools required

A Phillips head screwdriver is required to replace this part.

Troubleshooting image

Always ensure the machine is unplugged from the charger prior to carrying out any maintenance.

Troubleshooting image

Removing the battery

The battery is secured with three Phillips screws. One in the rear of the handle, and two in the underside of the battery.

Remove the three screws.

Dispose of the existing battery as per local codes and regulations.

Troubleshooting image

Replace the battery

Locate the new battery into the handle.

Secure in place with the three existing/supplied screws.

Troubleshooting image

A new battery will only be partially charged, and will require a full charge prior to use.

Were you able to fit your part?

Please check if your machine is under guarantee or purchase replacement parts below - your part will then be delivered to you. Your machine comes with complimentary parts when covered under your guarantee policy. To check if yours is still under guarantee, visit MyDyson

You might need a replacement part.

You can solve this by ordering a new Charger below or you can contact our Customer Support Team at 1-866-314-8881.

Charger

Part no. 967813-02

<p>Charges your vacuum with or without the Wall Dok&trade;.</p>

$29.99

Charger

Part no. 967813-02

<p>Charges your vacuum with or without the Wall Dok&trade;.</p>

$29.99

$29.99