Live Support Accessibility Statement Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson DC40 Animal vacuum

Let's get your machine working.

See all steps

Please select the appropriate option

Where have you noticed the drop in performance?

Check the brushbar

Plug in and switch on the machine.

Recline it into the vacuuming position.

Check the brushbar through the window at the front of the cleanerhead.

Check inlet suction

Turn off and unplug the machine.

Recline the machine into the vacuuming position.

Lay the machine on its front.

Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Turn the vacuum over so that the bin is facing upwards.

Place your hand over the opening then turn ON and test the suction.

Is the suction at the cleaner head inlet strong or is it weaker than usual?

Check the cleaner head

Turn off and unplug the machine.

Lay the machine on its front. Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Undo the soleplate by turning both fasteners anti-clockwise.

Open the soleplate and carefully cut away any hair or fibers using some scissors.

Check the brushbar for signs of damage.

Check the opening on the cleanerhead for blockages and remove as necessary.

Reassemble the machine

Refit the soleplate by locating the 3 lugs on the soleplate into the receiving recesses on the cleanerhead.

Lock the soleplate by turning both fasteners outwards as far as they will go.

Place the C-clip onto the cleanerhead.

Push the cleanerhead onto the machine until it clicks.

Has this resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Cleaner head is not working. You can solve this by ordering a new one below.

Cleaner head

Part no. 923644-01

Replacement cleaner head for your Dyson vacuum cleaner.

$83.99

Cleaner head

Cleaner head

Part no. 923644-01

Replacement cleaner head for your Dyson vacuum cleaner.

$83.99

$83.99

$83.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the duct and internal hose

Turn off and unplug the machine.

Press the release catch on top of the cyclone and remove the bin.

Check the entry duct hatch for obstructions and that the seal is correctly seated.

Check where the hose connects for any blockages.

Pull the internal hose collar down, unclip it and then check for blockages.

NB. Ensure there is no debris or blockages in the change over valve.

Reassemble and test the machine.

Has this resolved the problem?

Check the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin.

Press the button again to open the bin base.

Press the button near the rectangular inlet to remove the clear bin from the cyclone.

Check the bin and cyclone for blockages and remove as necessary.

Clear any hair or fibers from the cyclone shroud.

Gently tap the side of the cyclone over a bin (this will remove any fine dust clogged up in the cyclone).

Has clearing the bin and cyclone resolved the problem?

Washing the filters

Please follow the steps in the video.

Has washing the filters resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Remove the pre-filter

Remove the bin and cyclone from the machine and unclip the cyclone top handle.

Pull the filter out from the cyclone assembly.

Wash with cold water only.

WARNING: Do not use detergents.

Remove post-filter

Turn the central locking dial on the outer cover of the ball counter-clockwise until the cover is released. Lift off the cover.

Turn the filter one-quarter counter-clockwise to release.

The filter should be rinsed and tapped out until the water runs clean, then tapped out again to ensure all excess water is removed.

Dry the filters

Leave to dry completely for 24 hours.

Test the machine

Reassemble and test the machine.

Has washing the filters resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Reset brush bar

To reset the brush bar press the brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Are the bristles now spinning?

Bristles spinning

To reset the brush bar press the brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Has this resolved the performance issue?

Check the inlet suction

Turn off and unplug the machine.

Recline the machine into the vacuuming position.

Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Turn the vacuum over so that the bin is facing upwards. Place your hand over the opening then turn ON and test the suction.

Is there strong suction from the inlet?

Reset brush bar

To reset the brush bar press the brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Clear the cleanerhead

Please follow the steps in the video.

Clear the Cleanerhead

Turn off and unplug the machine.

Lay the machine on its front. Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Undo the soleplate by turning both fasteners anti-clockwise.

Open the soleplate and carefully cut away any hair or fibers using some scissors.

Check the brushbar for signs of damage.

Check the opening on the cleanerhead for blockages and remove as necessary.

Reassemble and reset the brushbar again.

Does the brush bar spin?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Clear the Cleanerhead

Turn off and unplug the machine.

Lay the machine on its front. Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Undo the soleplate by turning both fasteners anti-clockwise.

Open the soleplate and carefully cut away any hair or fibers using some scissors.

Check the brushbar for signs of damage.

Check the opening on the cleanerhead for blockages and remove as necessary.

Reassemble and reset the brushbar again.

Do the brushes now spin continually?

Test hose suction

To release the wand, open the wand cap and pull the wand up and away from the handle until it clicks into place.

Press the button on the hose collar to release the wand from the hose.

Test the suction from the hose.

Is the suction from the hose strong or weaker than usual?

Check the hose

Please follow the steps in the video.

Has checking the hose resolved the problem?

Check the hose

Press the button at the top of the cyclone handle and remove the bin.

To remove the hose press the release catch and firmly pull on the hose.

Check the hose for any holes or tears and remove any blockages.

Reassemble and test the machine

Has checking the hose resolved the problem?

Which part of the hose has split?

You might need a replacement part.

It looks like the Hose is not working. You can solve this by ordering a new one below.

Hose

Part no. 920765-03

Replacement hose for your Dyson vacuum cleaner.

$29.99

Hose

Part no. 920765-03

Replacement hose for your Dyson vacuum cleaner.

$29.99

$29.99

$29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Hose is not working. You can solve this by ordering a new one below.

Hose

Part no. 920765-03

Replacement hose for your Dyson vacuum cleaner.

$29.99

Hose

Part no. 920765-03

Replacement hose for your Dyson vacuum cleaner.

$29.99

$29.99

$29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Hose is not working. You can solve this by ordering a new one below.

Hose

Part no. 920765-03

Replacement hose for your Dyson vacuum cleaner.

$29.99

Hose

Part no. 920765-03

Replacement hose for your Dyson vacuum cleaner.

$29.99

$29.99

$29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Wand is not working. You can solve this by ordering a new one below.

Wand

Part no. 923523-01

Replacement wand for your Dyson vacuum cleaner.

$22.99

Wand

Wand

Part no. 923523-01

Replacement wand for your Dyson vacuum cleaner.

$22.99

$22.99

$22.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the duct and internal hose

Turn off and unplug the machine.

Press the release catch on top of the cyclone and remove the bin.

Check the entry duct hatch for obstructions and that the seal is correctly seated.

Pull the red internal hose collar down, unclip it and then check for blockages.

Reassemble and test the machine.

Has clearing the duct and internal hose resolved the problem?

When did the machine last have power?

Thermal cut out

Most Dyson vacuum have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

Please select the appropriate option

Where have you noticed the drop in performance?

Washing the filters

Please follow the steps in the video.

Is there anything else we can help you with?

Please select the appropriate option

Remove the pre-filter

Remove the bin and cyclone from the machine and unclip the cyclone top handle.

Pull the filter out from the cyclone assembly.

Wash with cold water only. Do not use detergents.

Remove post-filter

Turn the central locking dial on the outer cover of the ball counter-clockwise until the cover is released. Lift off the cover.

Turn the filter one-quarter counter-clockwise to release.

The filter should be rinsed and tapped out until the water runs clean, then tapped out again to ensure all excess water is removed.

Dry filters

Leave to dry completely for 24 hours.

Test the machine

Reassemble and test the machine

Is there anything else we can help you with?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check electrical supply

  • Is the power cord or plug damaged?
  • Are the other household appliances working?
  • Does the vacuum work when plugged into another socket?

Has checking the electrics resolved the problem?

Reset brush bar

To reset the brush bar press the brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Please select the next step

Check the brushbar

Plug in and switch on the machine.

Recline it into the vacuuming position.

Check the brushbar through the window at the front of the cleanerhead.

Do not plug in or attempt to use the machine until it has been repaired by our engineer.

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Press the button again to open the bin base.

Press the button near the rectangular inlet to separate the clear bin from the cyclone.

    • The clear bin can be wiped with a damp cloth.

WARNING: Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone for blockages and remove as necessary.

Clear any hair or fibers from the cyclone shroud.

WARNING:Do not use any water on the cyclone.

Once the parts are completely dry, reassemble and test the machine.

Has cleaning the bin and cyclone resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

When did the machine last have power?

Re-attach the cleanerhead

Remove the C-clip from the cleaner head, and align the cleanerhead on the machine.

Slide the C-clip onto the machine, ensuring it clips into place on both sides.

The C-clip may initially only clip on one side. Advise the customer that they will need to use some force to clip it in on both sides.

Has this resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Release the catch by hand

Pull the clear plastic catch on the base away from the bin.

Open the bin base and tip away the contents.

Press the bin release button on the cyclone handle.

Does the rod on the side of the bin slide up and down freely?

Apologies. We can't help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766. For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the brushbar

Plug in and switch on the machine.

Recline it into the vacuuming position.

Check the brushbar through the window at the front of the cleanerhead.

Does the brushbar spin when the machine is reclined?

Check soleplate

Check the soleplate to ensure there is no debris caught in the wheels or any damage/wheels missing.

Is there any damage to the soleplate?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Reset brush bar

To reset the brush bar press the brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Image shows how to turn the brush bar on/off.

Has resetting the brushbar resolved the problem?

Apologies. We can't help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766. For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Where were the sparks or smoke seen?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Blockage issue

This is likely caused by a blockage.

Clear the cleanerhead

Turn off and unplug the machine.

Lay the machine on its front.Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Undo the soleplate by turning both fasteners inwards as far as they will go.

Remove tthe soleplate and carefully cut away any hair or fibers using some scissors.

Check the brushbar for signs of damage.

Check the opening on the cleanerhead for blockages and remove as necessary

Please select the next step

Check the duct and internal hose

Turn off and unplug the machine.

Press the release catch on top of the cyclone and remove the bin.

Check the entry duct hatch for obstructions and that the seal is correctly seated.

Pull the internal hose collar down, unclip it and then check for blockages.

Please select the next step

Reassemble the machine

Locate the 3 lugs on the soleplate into the receiving recesses on the cleanerhead.

Lock the soleplate by turning both fasteners outwards as far as they will go.

Place the C-clip onto the cleanerhead.

Push the cleanerhead onto the machine until it clicks.

Has clearing the cleaner head resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Ensure that you return the machine to the upright position by pushing it firmly into place until it clicks. The stabilizer wheels will automatically lower.

Check the duct and internal hose

Turn off and unplug the machine.

Press the release catch on top of the cyclone and remove the bin.

Check the entry duct hatch for obstructions and that the seal is correctly seated.

Replace the bin onto the machine.

Recline the machine into the vacuuming position.Lay the machine on its front.

Pull the internal hose collar down, unclip it and then check for blockages.

Retest the machine

Has checking the duct and internal hose resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the duct and internal hose

Turn off and unplug the machine.

Press the release catch on top of the cyclone and remove the bin.

Check the entry duct hatch for obstructions and that the seal is correctly seated.

Pull the internal hose collar down, unclip it and then check for blockages.

Has clearing the duct and internal hose resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Has the ball shell come off the filter side or non-filter side?

Has the nut come out of the center of the ball shell?

You might need a replacement part.

It looks like the Ball shell filter side is not working. You can solve this by ordering a new one below.

Ball shell filter side

Part no. 924957-01

Replacement ball shell filterside for your Dyson vacuum cleaner.

$29.99

Ball shell filter side

Part no. 924957-01

Replacement ball shell filterside for your Dyson vacuum cleaner.

$29.99

Currently out of stock.

$29.99

Currently out of stock.

$29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

How to refit the ball shell

The ball shell can be screwed back onto the bolt on the main duct of the machine.

Please select the appropriate option

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Remove the post filter

Recline the machine and lay it on it's back or side.

Turn the center circle and remove the ball cover.

Twist the filter and remove from the ball.

Check the housing for any debris and remove as necessary.

Replace post filter cover and move machine without post filter in place.

Please select the next step.

Refit the filter

Place the filter back in the ball.

Ensure that the filter and ball cover are fitted securely.

Test the machine.

Has refitting the post filter resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Turn off the brushbar

Plug the machine in and recline into the vacuuming position.

Turn the machine on.

Turn the brushbar off using the switch next to the power button.

Has the noise stopped?

Clear the Cleanerhead

Turn off and unplug the machine.

Lay the machine on its front. Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Undo the soleplate by turning both fasteners anti-clockwise.

Open the soleplate and carefully cut away any hair or fibers using some scissors.

Check the brushbar for signs of damage.

Check the opening on the cleanerhead for blockages and remove as necessary.

Reassemble the machine

Refit the soleplate by locate the 3 lugs on the soleplate into the receiving recesses on the cleanerhead.

Lock the soleplate by turning both fasteners outwards as far as they will go.

Place the C-clip onto the cleanerhead.

Push the cleanerhead onto the machine until it clicks.

Has clearing the cleaner head resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check for blockages

This would suggest there is a blockage somewhere in the machine.

Please follow the next steps.

Check inlet suction

Turn off and unplug the machine.

Recline the machine into the vacuuming position.

Lay the machine on its front. Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Turn the vacuum over so that the bin is facing upwards. Place your hand over the opening then turn ON and test the suction.

Is the suction at the cleaner head inlet strong or is it weaker than usual?

Clear the Cleanerhead

Turn off and unplug the machine.

Lay the machine on its front.Taking care, remove the swivel C-clip connector and pull the cleaner head away from the vacuum's main body.

Undo the soleplate by turning both fasteners anti-clockwise.

Open the soleplate and carefully cut away any hair or fibers using some scissors.

Check the brushbar for signs of damage.

Check the opening on the cleanerhead for blockages and remove as necessary.

Please select the next step

Reassemble the machine

Refit the soleplate by locating the 3 lugs on the soleplate into the receiving recesses on the cleanerhead.

Lock the soleplate by turning both fasteners outwards as far as they will go.

Place the C-clip onto the cleanerhead.

Push the cleanerhead onto the machine until it clicks.

Has clearing the cleaner head resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Cleaner head is not working. You can solve this by ordering a new one below.

Cleaner head

Part no. 923644-01

Replacement cleaner head for your Dyson vacuum cleaner.

$83.99

Cleaner head

Cleaner head

Part no. 923644-01

Replacement cleaner head for your Dyson vacuum cleaner.

$83.99

$83.99

$83.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the duct and internal hose

Turn off and unplug the machine.

Press the release catch on top of the cyclone and remove the bin.

Check the entry duct hatch for obstructions and that the seal is correctly seated.

First remove Phillips head screw (may not be present in all variants) and pull the internal hose collar down.

Unclip it and then check for blockages.

Reassemble and test the machine.

Has checking the inlet resolved the problem?

Check the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin.

Press the button again to open the bin base.

Press the button near the rectangular inlet to remove the clear bin from the cyclone.

Check the bin and cyclone for blockages and remove as necessary.

Clear any hair or fibers from the cyclone shroud.

Gently tap the side of the cyclone over a bin. (This will remove any fine dust clogged up in the cyclone).

Has checking the bin and cyclone resolved the problem?

How to wash the filter

Please follow the steps in the video.

Has washing the filters resolved the problem?

Remove the pre-filter

Remove the bin and cyclone from the machine and unclip the cyclone top handle.

Pull the filter out from the cyclone assembly.

Wash with cold water only.

WARNING: Do not use detergents.

Remove post-filter

Turn the central locking dial on the outer cover of the ball counter-clockwise until the cover is released. Lift off the cover.

Turn the filter one-quarter counter-clockwise to release.

The filter should be rinsed and tapped out until the water runs clean, then tapped out again to ensure all excess water is removed.

Dry the filters

Leave to dry completely for 24 hours.

Test the machine

Reassemble and test the machine

Has washing the filters resolved the problem?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Remove the bin and cyclone

Press the button at the top of the cyclone handle.

Remove the bin and cyclone from the machine.

Turn the machine on, keeping it in the upright position.

Is the whistle still present with the cyclone removed?

Test machine without the post filter

Recline the machine and lay it on it's back or side.

Turn the center circle and remove the ball cover.

Twist the filter and remove from the ball.

Turn the machine on.

Is the whistle still present with the post filter removed?

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Reassemble your machine

Refit the filter ensuring it sits flush against the inside of the ball.

Turn the machine on.

Has refitting the post filter resolved the problem?

You might need a replacement part.

It looks like the Post filter is not working. You can solve this by ordering a new one below.

Post filter

Part no. 922676-01

Replacement post filter for your Dyson vacuum cleaner.

$29.99

Post filter

Post filter

Part no. 922676-01

Replacement post filter for your Dyson vacuum cleaner.

$29.99

$29.99

$29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the seals

Check the seals for signs of wear or damage.

Flex out the seals' outer edges to make sure they sit flush against the corresponding openings.

Apologies. We can’t help you online.

Our Customer Support Team will be able to solve your problem on 1-866-693-9766.

For Supersonic™ hair dryer Professional edition owners, please contact us on 1-866-861-2565.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent