Dyson Omni-glide+ | Help and support for your Dyson V11™ cordless stick vacuum | Dyson

/content/dam/contentfragment/dyson/prospect-capture/us/en/prospect-capture-gobal-cf

- Battery
- Maintenance
- FAQs

Register your machine

You can get support that's tailored to you, owner exclusives and more when you register your machine.

Register your machine

Getting started

You can quickly get up and running with our step-by-step guide.
"Watch video"

Video Transcript

Open video transcript

Dyson Omni-glide™ vacuum user manual

Download your Dyson Omni-glide™ user manual.

PDF 2.27 MB

Using your machine

Understanding the two cleaning modes

Eco mode

The optimum balance of power and run time, for everyday hard floor cleaning with your omnidirectional soft roller cleaner head.

Max mode

Delivers maximum power for spot cleaning. Ideal when using your vacuum as a handheld.

Choosing the right tool for the task

Tool offerings will vary between retailers. Your machine may not have included all of the tools listed below, but they can be purchased separately on Dyson.com To see all of the tools that are compatible with your machine, click here.

For a variety of cleans

Two tools in one, the Combination tool provides both soft dusting and access to tight spaces.
For soft surfaces and upholstery

The Mini motorized tool is ideal for cleaning sofas and mattresses.

For smaller hard surfaces

The Worktop tool conveniently cleans table tops and other surfaces.
For difficult to see areas

The Light pipe crevice tool illuminates the hidden dirt in dark spaces.

Charging your machine

"Watch video"

Video Transcript

Open video transcript

Installing your docking station

You can charge your battery using the docking station that came in the box. This can be mounted to the wall or placed on a flat surface so your machine is always ready to go. See how to set it up in the above video.
Charing your machine's battery

It's important to fully charge all batteries as soon as you open the box, and after every clean. You can charge your battery on or off your machine, in or outside of the dock.

Maintaining your machine

It's important to maintain your machine to keep it working at its best. From washing the filter to emptying the bin, you can find tips and advice below.

"Watch video"

Video Transcript

Open video transcript

Washing the filter

We recommend washing your filter once a month for your vacuum to perform at its best. Your filter should be washed by hand, not in a dishwasher. Watch how to do it quickly and easily.
Checking for blockages

The most common reason for reduced suction power is debris blocking the airflow. If this occurs, remove the wand, bin and cleaner head and clear any blockages you find.
"Watch video"

Video Transcript

Open video transcript

Emptying the bin

To maintain suction, it's important to empty the bin before dust or debris reaches the MAX line. Watch how to do it.

Detangling the brush bars

Clearing wrapped hair and fibres relieves unnecessary strain on your machine's motor. This can be done easily by removing the brush bars from the cleaner head.
"Watch video"

Video Transcript

Open video transcript

Washing the brush bars

Removing fine dust maintains the effectiveness of your brush bars. Detach them from the cleaner head, and using cold tap water only, gently rub them until the water runs clear. Make sure they're completely dry before reusing. Watch how to do it.

For detailed instructions on maintaining your machine, you can download your user manual.

Frequently asked questions

Does the vacuum work on carpets?

The omnidirectional soft roller cleaner head is engineered for hard floors only.

How often should I clean the filter?

We recommend you clean your filter around once a month, but this may be more frequent if you use your machine heavily. After cleaning your filter, always leave it to dry for at least 24 hours. Ensure it's completely dry before refitting on your machine. We strongly recommend following the cleaning instructions and cleaning by hand. The filter is not suitable for dishwasher use.

How long does the battery take to fully charge?

A full charge takes up to 3.5 hours. The LED light on the end of the handle will pulse with a blue LED light when charging and will go out when fully charged.

Can I leave my vacuum on charge?

Your battery has been designed to be left on charge, so it’s fine to leave it plugged in after charging.

Does this machine connect to the Dyson Link app?

Your machine works independently and doesn't connect to the Dyson Link app.

Why Register? More perks.

Exclusive Savings Events

Save 20% during Savings Events, only for Dyson owners.
First to know

Registered owners receive exclusive events and sneak peeks at our latest technology before anyone else.
Dyson Technology Trial Program

Experience the latest technology in our invitation-only reviewer program.
Machine Information

Helpful tips to get the most out of your machine and keep it working at its best.

We don’t stop caring about our machines once they’re yours. Registering your machine allows us to give you a tailored, complimentary, direct service for your machine. Even after your warranty has ended, we’ll still be on hand to help.

Register your machine