How to change Combi Glass HEPA filter video
When your non-washable filter unit needs replacing the machine will display the pattern above. Always switch 'OFF' and unplug before carrying out any maintenance. Press both catches on either side of the air amplifier at the same time and lift off the main body. Release the filter from the housing by pressing where indicated by the arrows. Dispose of the filter assembly only in a household waste bin. Carefully remove the new filter from any packaging. Locate the new filter inside the filter housing. Place the filter housing on the main body assembly. Push down ensuring it clicks into place. Open the sensor hatch on the side of the machine. Use a cotton swab to carefully clean inside. Refit the sensor hatch ensuring in clicks shut. When you have re-assembled your machine, plug the machine back in and press the standby ON/OFF button. Press and hold the standby ON/OFF button on the remote for 6 seconds. A clockwise-rotating loading pattern will be shown on the LED display. Once the loading pattern is complete, the machine will return to its normal usage.