/content/dam/contentfragment/dyson/prospect-capture/us/en/prospect-capture-gobal-cf

Register your machine

You can get support that's tailored to you, owner exclusives and more when you register your machine.

Register your machine

Getting started

Using your machine

"Watch video"

The lights on your machine

Learn about the lights on your machine and what to do if they turn on, or start flashing.
"Watch video"

Understanding the power modes

Learn about your machine's three power modes, and when to use them.
"Watch video"

Setting up the docking station

See how to fit the docking station, and recharge your machine.

Maintaining your machine

"Watch video"

Flashing filter light

The light flashes intermittently when the filter isn’t fitted correctly, and your machine will stop. See how to refit it, and get your machine running again.
"Watch video"

Checking for blockages

If an object becomes lodged, your blockage indicator light will flash, and your machine may stop working. Follow our step-by-step guide to check every part.
"Watch video"

Resetting the brush bar

The brush bar is designed to shut off when jammed. Learn how to remove the debris, and reset the brush bar.

Useful tips

Three power modes

Toggle between Suction mode 1 and 2 – and MAX mode, for stronger suction. To change modes, simply slide the control back and forth.
Switch accessories quickly

The quick-release tools click into place, and release in moments by simply depressing the release switch.
Don't overfill it

To maintain suction, keep an eye on the bin and empty it as soon as debris reaches the MAX marker.

Secure the charging dock

Leave at least 1.2m between the floor and the lowest screw point. Make sure it's within easy reach of a power socket so the cable has some slack.

Wash the filter regularly

Rinse under a cold tap until the water runs clear – you don't need any detergents. Shake off any excess water, then leave to dry for at least 24 hours before refitting.

Clean awkward spaces

Remove the wand and connect your chosen tool directly to the inlet pipe to use the vacuum as a handheld.

User guide

Check your user guide online or download a copy.

Docking station installation guide

Check your docking station installation guide online or download a copy

Frequently asked questions

Is my machine compatible with the Dyson Cyclone V10 Dok™?

Yes, the Dyson Cyclone V10 Dok™ is compatible with all Dyson Cyclone V10™ cordless vacuums.

Discover more about the Dyson Cyclone V10 Dok™

How often does the filter on this machine need washing?

We recommend that you clean the filter at least once a month. You can find filter maintenance instructions in the machine's User Guide.

Can I use this machine with an extension cable?

No, the use of an extension cable is not recommended.

Can I use this machine to pick up liquids?

No. Don't pick up water or other liquids with your machine.

Why Register? More perks.

Exclusive Savings Events

Save 20% during Savings Events, only for Dyson owners.
First to know

Registered owners receive exclusive events and sneak peeks at our latest technology before anyone else.
Reviewer Program

Experience the latest technology in our invitation-only reviewer program.
Machine Information

Helpful tips to get the most out of your machine and keep it working at its best.

We don’t stop caring about our machines once they’re yours. Registering your product allows us to give you a tailored, complimentary, direct service for your machine. Even after your warranty has ended, we’ll still be on hand to help.

Register your machine

Dyson Cyclone V10™ cordless stick vacuum

/content/dam/contentfragment/dyson/prospect-capture/us/en/prospect-capture-gobal-cf

Register your machine

You can get support that's tailored to you, owner exclusives and more when you register your machine.

Register your machine

Getting started

"Watch video"

Video Transcript

Open video transcript

Using your machine

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

Video Transcript

Open video transcript

"Watch video"

The lights on your machine

Learn about the lights on your machine and what to do if they turn on, or start flashing.
Video Transcript

Open video transcript

"Watch video"

Understanding the power modes

Learn about your machine's three power modes, and when to use them.
Video Transcript

Open video transcript

"Watch video"

Setting up the docking station

See how to fit the docking station, and recharge your machine.

Problem with your machine?

Try our new voice assistant.

Get troubleshooting advice for your cordless vacuum cleaner using Dyson Care

Say, "Alexa, open Dyson Care" to get started

Maintaining your machine

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

Video Transcript

Open video transcript

"Watch video"

Flashing filter light

The light flashes intermittently when the filter isn’t fitted correctly, and your machine will stop. See how to refit it, and get your machine running again.
Video Transcript

Open video transcript

"Watch video"

Checking for blockages

If an object becomes lodged, your blockage indicator light will flash, and your machine may stop working. Follow our step-by-step guide to check every part.
Video Transcript

Open video transcript

"Watch video"

Resetting the brush bar

The brush bar is designed to shut off when jammed. Learn how to remove the debris, and reset the brush bar.

Useful tips

Three power modes

Toggle between Suction mode 1 and 2 – and MAX mode, for stronger suction. To change modes, simply slide the control back and forth.
Switch accessories quickly

The quick-release tools click into place, and release in moments by simply depressing the release switch.
Don't overfill it

To maintain suction, keep an eye on the bin and empty it as soon as debris reaches the MAX marker.

Secure the charging dock

Leave at least 1.2m between the floor and the lowest screw point. Make sure it's within easy reach of a power socket so the cable has some slack.

Wash the filter regularly

Rinse under a cold tap until the water runs clear – you don't need any detergents. Shake off any excess water, then leave to dry for at least 24 hours before refitting.

Clean awkward spaces

Remove the wand and connect your chosen tool directly to the inlet pipe to use the vacuum as a handheld.

User guide

Check your user guide online or download a copy.

Docking station installation guide

Check your docking station installation guide online or download a copy

PDF 1.98 MB

Frequently asked questions

Is my machine compatible with the Dyson Cyclone V10 Dok™?

Yes, the Dyson Cyclone V10 Dok™ is compatible with all Dyson Cyclone V10™ cordless vacuums.

How often does the filter on this machine need washing?

We recommend that you clean the filter at least once a month. You can find filter maintenance instructions in the machine's User Guide.

Can I use this machine with an extension cable?

No, the use of an extension cable is not recommended.

Can I use this machine to pick up liquids?

No. Don't pick up water or other liquids with your machine.

Why Register? More perks.

Exclusive Savings Events

Save 20% during Savings Events, only for Dyson owners.
First to know

Registered owners receive exclusive events and sneak peeks at our latest technology before anyone else.
Reviewer Program

Experience the latest technology in our invitation-only reviewer program.
Machine Information

Helpful tips to get the most out of your machine and keep it working at its best.

We don’t stop caring about our machines once they’re yours. Registering your product allows us to give you a tailored, complimentary, direct service for your machine. Even after your warranty has ended, we’ll still be on hand to help.

Register your machine