Airblade™ technologyin a tap.
Wash and dryhands at the sink.
See it in action
How to buy
With Airblade™ hand drying technology in a tap, hands can be dried at the sink in just 14 seconds.7 There's no need for users to move to a separate drying area, so no water is dripped on the floor.
Other hand drying methods take up valuable wall and floor space. With the Dyson Airblade Tap hand dryer, there's room for extra toilet stalls and other facilities.
Every second, up to 9.25 gallons of air are forced through apertures up to 0.8 mm wide. The result — 420mph sheets of air that scrape water from hands, drying them hygienically in just 14 seconds.7
Saves you money
The Dyson Airblade Tap hand dryer costs an average of just $48 to operate for a year. That's up to 69% less than other hand dryers, and up to 97% less than paper towels.8
Find out more about operating costs and use our calculator to see how much you could save by switching to Airblade™ technology.
Dr. Gary Hurlock — Vice President, Food Safety & Quality Assurance
The Dyson Airblade Tap hand dryer takes 14 seconds to dry hands.7 So users spend less time in the washroom, and busy periods are easier to manage.
The Dyson digital motor V4 is one of the world's smallest fully-integrated 1600W motors. It spins 90,000 times a minute, and is the only hand dryer motor powerful enough to make Airblade™ technology possible.
The Dyson Airblade Tap hand dryer comes fitted with a HEPA filter. It captures 99.97% of particles the size of bacteria as small as 0.3 microns from the washroom air.So, hands are dried with cleaner air, not dirty air.
The HEPA filter removes airborne particles from the air. It has a grill to capture larger debris, a fleece layer to capture fluff and fibers and a pleated HEPA media to capture particles as small as 0.3 microns.
Points to consider before installation
Each Dyson Airblade Tap hand dryer requires the following supply and fit specification. For more information, please download our pre-installation guide.
Dry, indoor environments only.Maximum operating elevation 2000m.
Dedicated 15amp powersupply per appliance. Correct power available to the appliance (HV 200-253v 1600)
Water pressure between 1>8 bar.1 ½ BSP pipe feed required toappliance.Water temperature controller available? (Thermostaticmixer/water heater).
AB09 / AB10 - Room under sink formotor to be mounted to surface(266mm x 142mm x 189mm)
Do you have the right type of sink?
Click the link below to see our list of approved sinks.
For more information on machine dimensions, electrical supply and construction materials, download the technical specification.
Find out recommended mounting heights, clearance distances and more installation information by downloading the technical specification.
Hands are dried in 12-14 seconds 7.
HEPA filters as standard.
Up to 69% less thanother hand dryers.
Lower CO2 emissions,no paper waste.
Parts and Labor.
Dyson Airblade™ hand dryer range
Airblade™ hand drying technology in a tap.
The most hygienic hand dryer is now 30% quieter.9
The fastest, most hygienic hand dryer.
Get the latest Airblade™ technology news delivered to your inbox.
Hear what businesses are saying about their experiences with Airblade™ technology.
Explore technical specifications, installation guides and information for architects.
Buy Airblade™ technology.